Full Information to VVS2 Readability

VVS2 diamonds are very close to FL diamonds (flawless) and IF diamonds (internally flawless). They have more inclusions than VVS1 diamonds, but not excessively.

Most of all, these imperfections are not easy to spot. For experienced graders, it would be a challenge to find these inclusions at 10X magnification. If you grab the jeweler’s loupe and look inside the diamond, it likely appears flawless.

However, these are some things you should know about the VVS2 rating, and the devil is in the details.

VVS2 Clarity – Basic Properties

VVS2 or Very Very Slightly Included 2 is the lower classification in the VVS category. This means that the properties of the inclusions are different from those of VVS1, IF or FL diamonds.

Flawless or FL diamonds have no inclusions or defects at 10X magnification. This is how a skilled grader would find the diamond, and you should get the same result if you want to look at the diamond for yourself. IF diamonds, on the other hand, have no inclusions at all, apart from a few small defects.

These tiny imperfections on the surface of the stone do not affect the overall properties of the diamond. In addition, no matter how hard you try to change the viewing angle and light, they remain invisible to the naked eye.

However, when comparing a VVS1 and VVS2 diamond, it can be difficult for any layperson to tell the difference in rating. The fact is, even if you were to examine the stones under a microscope, it is difficult for you to tell them apart.

And then there is the diamond’s willingness to be graded. When looking for a needle in a haystack, tiny particles of dust can mislead you if you forgot to wipe the diamond and everything. That is, dust particles would look more like blemishes than inclusions.

Let’s take a closer look at the properties of the inclusions in VVS2 bricks.

VVS2 containment properties

The thing is, some inclusions are almost inevitable. It takes nature one to three billion years, and with intense heat and pressure, to convert carbon-containing organic substances into diamonds. It is simply unreasonable for anyone to expect this to happen to perfection over the years, unless it is a laboratory-made diamond.

So we found that there are few VVS2 inclusions, but how do they compare to those in VVS1 diamonds?

The usual inclusions in the form of points, feathers or needles occur for both classes. If the stone is cloudy or grainy, you will not see a VVS2 or VVS1 diamond.

Regarding the difference between the two grades, VVS2 as a lower grade means that diamonds of this rating can have a greater number of inclusions. Either that or they could be near the stone plateau.

For example, you might come across a VVS1 diamond that has five or more pinpoint inclusions. But as long as these inclusions do not cluster into a cloud, they are not invisible to the naked eye.

In contrast, a VVS2 diamond could have some feather inclusions with pronounced reflectivity. As such, these inclusions would be easier to spot, hence the lower rating.

Certain inclusions can be strange in color as the feather appears white and some crystal points are dark. This affects the grading, but not the overall color of the diamond. On the contrary, the lower color level could actually mask the color imposed by the inclusion.

Again, this only applies to VVS2 diamonds. VVS1 diamonds are required to have fewer colorless inclusions that have little to no reflectivity.

What about the cut?

Most experts would agree that the cut is king. In other words, the cut emphasizes the natural brilliance and color of a stone and hides some of the inclusions. That means you have more options in the cut of VVS2 diamonds.

For example, due to the number of parallel facets of the cut, it cannot be recommended to choose an Asscher cut VS1 diamond. You can use an Asscher cut VVS2 diamond as long as the inclusions are not near the plateau.

Therefore, the number and type of inclusions actually determine the appropriate cut. Whenever possible, a jeweler can try to mask the reflection of the inclusions or include them in the flow of diamonds.

All in all, it’s within the realm of the possibility of choosing a bold cut for a VVS2 diamond. It still appears eye-clear and the inclusions are unlikely to appear under different lighting and viewing angles.

What are the prices for VVS2 diamonds?

First and foremost, diamond prices are not just based on clarity. The carat and color are the other main culprits, and then there’s the cut. Overall, they make up the 4Cs of the diamonds.

Sure, a larger diamond is likely to be more expensive. The same applies to a colorless diamond (D color on the GIA scale). When it comes to the cut, the complexity and craftsmanship add to the final price. However, some cuts can also be more expensive due to their popularity or high demand.

A rough estimate for a 1-carat VVS2 color D diamond would be between $ 8,000 and $ 11,000. E and F diamonds of the same weight would be about $ 500 to $ 2,000 less. And so on.

However, the price does not grow proportionally to the size, but rather exponentially. Compared to the 1-carat stone mentioned above, a 2-carat stone would cost $ 35,000 to $ 55,000.

Now let’s get back to earth and figure out a reasonable number for a VVS2 diamond engagement ring. The best guess is that you should be able to get, give, or take a great VVS2 ring for $ 10,000. That includes the setting, the cut, the auxiliary gems, and all the good stuff with a 1.00-carat center stone.

Is there any way I can save on VVS2 diamonds?

Yes, but there aren’t that many shopping opportunities. When you are spending less on a diamond, you usually have to settle for a diamond of lesser or lesser quality.

For example, a lower level of color can make a difference of a few hundred dollars, if not thousands. This means that you may have to settle for a yellowish reflection and you will be able to judge whether it is worth it.

Carats that are between 0.50 and 0.75 are usually less expensive. This generally applies to all non-standard sizes (e.g. 0.90 carat).

Finally, you can plan to shop in the off-season. This means that you should avoid buying diamonds on important dates and in the spring. Just keep in mind that the off-season for one area of ​​the country may not be the same for the next.

Top 3 VVS2 Diamond Rings – Estate Diamond Jewelry Collection

1. Redmond ring

A GIA-certified 1.05 carat diamond is at the center of the Redmond ring. The color is F and the clarity is VVS2. The shoulders of the ring have two more baguette-cut diamonds on each side, of which those closer to the shaft are tapered.

This is a handcrafted piece made from platinum. Because of the cut, the center stone appears larger than and the additional diamonds add to its brilliance.

Overall, the Redmond offers clean lines and timeless aesthetics that go with any style. Plus, it’s quite a bargain in its specs too.

2. New York ring

Do you need a flashy engagement ring? The New York could be exactly what you are looking for. From the GIA-certified Asscher cut diamond of 1.01 carat to the intricate openwork filigree in the lower gallery, this ring seems to have it all.

There is also a halo made from auxiliary gemstones that follows the square shape of the center stone. The shoulders of the ring have a floral motif with fine milgrain that is also present on the bezels.

The triple wire shaft completes the design and creates a vintage-style piece that is almost certain to put a smile on the bride-to-be’s face.

3. 5.14 carat Tiffany ring

If money doesn’t matter then how about this Tiffany piece armed with a bold 5.14-carat G color diamond and VVS2 clarity. The center stone is cut emerald green and a GIA certificate is included.

You will also get two trapezoidal diamonds or one on each flank. These gemstones weigh about 0.80 total carats and are VS clarity and GH color. The platinum ring is part of the engagement ring collection signed by Tiffany & Co.

After all, this is a rare piece and a great addition to your jewelry collection.

In search of clarity

Can a VVS2 diamond be a good buy? Of course it can definitely be the case. More importantly, VVS2 diamonds are eye-clean and appear more valuable to the untrained eye than their prices.

The trick to getting a diamond, let alone a VVS2 diamond, is to strike a middle ground for all 4Cs, depending on your budget, of course. There’s plenty of room to lower the color rating and still bag an impressive rock.